A Finnish firm thinks it can cut industrial carbon emissions by a third

Just three industries—chemicals, steel and cement—account for around a fifth of all man-made carbon-dioxide emissions (see chart). Not only are those industries big polluters, they are also hard to clean up. That is because all three rely on chemical processes that can only happen under very high temperatures. Standard electrical heating systems, if they are supplied by low-carbon power stations, can provide temperatures of several hundred degrees. That is good enough for many kinds of manufacturing—but not all.

Extracting iron from its ore, for instance, is the first step in steelmaking. Temperatures inside the furnaces used to do that can exceed 1,600°C. Cement kilns, which convert limestone into clinker, one of cement's raw ingredients, can reach 1,400°C. Because it is tricky or impossible to produce such temperatures for some industrial processes using electricity alone, firms rely on fossil fuels.

Green-minded businesses have been exploring alternatives. Hydrogen, for instance, can be produced by splitting water into its component elements. If that is done with clean energy, the gas can be burned as a zero-carbon fuel. Another option might be to stick with fossil fuels, but to capture and bury the carbon dioxide they generate, an idea known as carbon capture and storage. But both technologies are nascent, and would require the building of a great deal of new infrastructure that does not yet exist.

At the Brightlands Campus, a state- and industry-backed innovation centre near Maastricht, in the Netherlands, a Finnish engineering firm called Coolbrook is hoping to change that. Its "RotoDynamic" system is designed to supply just the sorts of super-high temperatures needed by heavy industry—and to do so while being powered solely by electricity.

Spinning up

The easiest way to think about Coolbrook's system is as a gas turbine in reverse. A conventional gas turbine—as used in power stations or jet engines—burns fossil fuel to create a hot, high-pressure gas that spins rotor blades. That rotational energy can be used to run a thrust-generating fan (as in jet aircraft) or converted to electricity in a generator (as in a power station).

The new system begins instead with an electric motor. The motor spins the turbine's rotors. Gas or liquid is then fed to the turbine. Once inside, the rotors accelerate the stuff to supersonic speeds, and then rapidly slow it again. The sudden deceleration transforms the kinetic energy contained in the accelerated gas or fluid into heat. If the motor is powered by green electricity, then no carbon dioxide is produced.

The first test of the pilot plant at Brightlands will involve steam cracking, one of the most energy-intensive processes in petrochemical plants. Conventional crackers decompose naphtha, one component of crude oil, into smaller molecules. As the name suggests, this is done by diluting the naphtha with steam then blasting it, in the absence of oxygen, in a furnace.

Coolbrook's pilot plant will instead inject a mix of naphtha and steam into the rotating turbine, which will heat it to around 1,000°C. That should break the naphtha into substances such as propylene and ethylene, which are used for making plastics. The hope is to prove that not only is it possible to crack naphtha in an electric reactor, but that it is better. Laboratory trials have shown that yields from the electrified process could be significantly higher than what can be obtained with fossil fuels.

Assuming all goes according to plan, the system will be tested producing heat for other industrial processes. Joonas Rauramo, Coolbrook's boss, reckons the heater should be able to hit temperatures of up to 1,700°C. That would make it suitable for a number of energy-intensive applications, including the production of steel, cement, glass and ceramics. Several big firms have signed on as partners for the pilot project. They include Shell, a British-Dutch oil firm, Braskem, a Brazil-based chemicals producer, and CEMEX, one of the world's biggest cement-makers.

Electric heat will not be enough to entirely eliminate carbon emissions from heavy industry. A good fraction comes not from burning fossil fuels, but from the chemistry of the processes. About half the carbon-dioxide emissions from cement-making, for instance, come from the calcination of limestone into clinker.

Firms are working on ways to clean up those processes, too. In the meantime, Mr Rauramo reckons rotor technology could eliminate perhaps 30% or so of the sector's emissions. And, he says, it can do so without needing to invent anything fundamentally new. "It is a known science," says Mr Rauramo. "It has just not been applied in exactly the way we are doing it."

© 2023 The Economist Newspaper Limited. All rights reserved.

From The Economist, published under licence. The original content can be found on https://www.economist.com/science-and-technology/2023/06/07/a-finnish-firm-thinks-it-can-cut-industrial-carbon-emissions-by-a-third